More info
The ultimate addition to the Ronin AEG lineup is here! The "Tekken" TK.45 AEG 3 is an SMG-based carbine with a slender aluminum 10 inch M-LOK free float rail and KWA’s Kinetic Feedback System (KFS). This model also features a quick-change spring systems that add even more customizability.
Like all current KWA rifle offerings, the receiver of the Tekken Series is full metal, but also features contemporary billet-styling on both the upper and lower, further enhancing the aggressive and modern look of the AEG. The angled polymer magwell doubles as a foregrip and allows for maximum retention and manipulation when you need it. A 120 round mid-cap magazine is included and is also available in a 3-pack.
With full ambidextrous and oversized controls, including an aggressive ambi charging handle, MLOK aluminum free float rail, and PTS Enhanced Polymer Furniture, the Tekken Series displays KWA’s unrivaled quality and craftsmanship, leaving the nearest competition in the dust.
Product Features - AEG 3.0+ gearbox
- Gate TITAN compatible!
- Kinetic Feedback System (recoil)
- Custom-designed, lightweight, MLOK compatible rail
- M-LOK rail adapters included
- PTS Enhanced Back Up Iron Sights (EPBUIS)
- PTS EPS stock
- Enlarged trigger guard
- Custom 2-port muzzle brake
- Ambidextrous selector switch
- Ambidextrous charging handle
- Improved high-torque motor
- Upgraded high-speed gear set
- Switch Life Extender to prevent contact burnout
- Rotary hop up chamber
- Includes 1x 120 rnd. magazine
| Specifications: - Length Retracted: 29.25"
- Length Extended: 32"
- Outer Barrel Length: 11"
- Inner Barrel Length: 337mm (13.25")
- Inner Barrel Diameter: 6.05mm
- Magazine Capacity: 120 rounds
- Weight (without mag): 7.12 lbs
- Rate of Fire: 19+ RPS
- Velocity: 380 FPS
- Energy Output (with 0.20g BB): 1.4 Joules
- Power Source: NiMh or Li-po/Li-Fe
|
Players and professionals looking to get the ultimate performance and durability out of their TK.45's should consider the addition of one of our upgrade services:
- Includes: AOE correction, reshimming, clean and relube w/Superlube
- Modified G&G green bucking
- R-Hop installation
- Lambda One 6.01 stainless steel barrel
- Retro Arms CNC air nozzle
- KWA Gen. 2 tappet plate
- Tappet spring spacer
- Lonex double o-ring aluminum cylinder head
- 70 degree Air-Pad (Gen. 2)
- Lonex POM piston head
- 70D Viton O-rings
- CYMA 14t AOE corrected piston
- ASG Infinity 18K motor
- SHS 12.65:1 gearset
- Gate TITAN ETU Advanced w/USB Link
- MAXX CNC tuneable flat trigger
- Deans plug
- Tier 1 upgrade FAQ
| - Includes: AOE correction, reshimming, clean and relube w/Superlube
- Modified G&G green bucking
- R-Hop installation
- Lambda One 6.01 stainless steel barrel
- Retro Arms CNC air nozzle
- KWA Gen. 2 tappet plate
- Tappet spring spacer
- Lonex double o-ring aluminum cylinder head
- 70 degree Air-Pad (Gen. 2)
- Lonex POM piston head
- 70D Viton O-rings
- CYMA 14t AOE corrected piston
- Warhead 30K brushless motor
- Gate TITAN ETU (advanced w/USB Link)
- MAXX CNC tuneable flat trigger
- Deans plug
- Ulysses Recoil Kit
- Tier 1 upgrade FAQ
- Excellent semi-auto response with peak full auto ROF
- Offers the absolute best efficiency and lowest amp draw
| - Replaces mechanical trigger switch
- Adjustable trigger sensitivity
- Pre-cocking
- Active Brake
- Programmable burst fire (2-10 rounds)
- Binary trigger mode
- Series safety limit
- Optional magazine mode w/capacity programming
- Optional simulated reload delay
- Optional Low ammo warning
- ROF control
- Trigger equalizer
- User statistics
- Low battery LiPo protection
- Audible warning notifications
- Diagnostic error code center
- Low battery protection
- Electronic fuse
- Operating voltage 7.4v - 14.8v
- Includes USB Link for programming
- does not impact battery space
|
*Parts substitutions may be made based on availability. If a substitution is made, parts of equal or greater quality will be used in your build. All parts are generally held in stock.
View larger 
