More info
The QRF MOD.1 is the rifle every airsoft fan has been waiting for! The inspiration behind the Mod. 1 came from a hybrid of a SMG and a Pistol Caliber Carbine and was created by some world’s leading airsoft designers and engineers.
The adjustable FPS system allows you to go from CQB to field play with a 340-390 FPS adjustment range. Highlighted by a Switch Life Extender to minimize the wear and tear on trigger contacts, the AEG 2.5 provides Milsim and Field players the ultimate AEG rifle to outlast the competition. Additional new features include magazine cutoff compatibility combined with adjustable FPS for users to customize their KWA AEG rifle to their own specifications with the new VPS tool (included in every box).
Check out our QRF MOD 1 review here!
Product Features - AEG 2.5+ gearbox (VPS)
- Newly updated tanker-style stock
- Custom-designed, lightweight, MLOK-compatible rail
- Ambidextrous fire selector
- Ambidextrous charging handle
- Enlarged trigger guard
- Aggressive SOCOM-style muzzle brake
- Front & rear PTS Enhanced Polymer flip-up sights
- Improved high-torque motor
- Upgraded high-speed gear set
- Switch Life Extender to prevent contact burnout
- Quick-change spring set up
- Variable FPS adjustment
- PTS EPG-C Enhanced Polymer Grip
- Rotary hop up chamber
- One-piece upper receiver
- Gate TITAN compatible!
| Specifications: - Length (Retracted): 22.00" (558.8mm)
- Length (Extended): 26.75" (171.45mm)
- Height: 8" (203.2mm)
- Outer Barrel Length: 6.75" (171.45mm)
- Inner Barrel Length: 7.25" (184.15mm)
- Magazine Capacity: 80
- Weight: 5.79 lbs (2.63 kg)
- Rate of Fire: 20+
- Velocity: ~345 FPS min ~390 FPS max, Adjustable FPS
- Power Source: NiMh or LiPo/LiFe
|
Players and professionals looking to get the ultimate performance and durability out of their KWA should consider the addition of one of our upgrade services:
- Includes: AOE correction, reshimming, clean and relube w/Superlube
- Modified G&G green bucking
- R-Hop installation
- Lambda One 6.01 stainless steel barrel
- Retro Arms CNC air nozzle
- KWA Gen. 2 tappet plate
- Tappet spring spacer
- Lonex double o-ring aluminum cylinder head
- 70 degree Air-Pad (Gen. 2)
- Lonex POM piston head
- 70D Viton O-rings
- CYMA 14t AOE corrected piston
- SHS 13.65:1 gearset
- ASG Infinity 22K Neodymium motor
- Gate TITAN ETU Advanced w/USB Link
- MAXX CNC tuneable flat trigger
- Deans plug
- Tier 1 upgrade FAQ
- Excellent semi-auto response with above average full auto ROF compared to stock
| - Includes: AOE correction, reshimming, clean and relube w/Superlube
- Modified G&G green bucking
- R-Hop installation
- Lambda One 6.01 stainless steel barrel
- Retro Arms CNC Air Nozzle
- KWA Gen 2 tappet plate
- Tappet spring spacer
- Lonex double o-ring aluminum cylinder head
- 70 degree Air-Pad (Gen. 2)
- Lonex POM piston head
- 70D Viton O-rings
- CYMA 14t AOE corrected piston
- SHS 13.65:1 gearset
- Warhead 30K brushless motor
- Gate TITAN ETU Advanced w/USB Link
- MAXX CNC tuneable flat trigger
- Deans plug
- Tier 1 upgrade FAQ
- Excellent semi-auto response with peak full auto ROF
- Offers the absolute best efficiency and lowest amp draw
| - Replaces mechanical trigger switch
- Adjustable trigger sensitivity
- Pre-cocking
- Active Brake
- Programmable burst fire (2-10 rounds)
- Binary trigger mode
- Series safety limit
- Optional magazine mode w/capacity programming
- Optional simulated reload delay
- Optional Low ammo warning
- ROF control
- Trigger equalizer
- User statistics
- Low battery LiPo protection
- Audible warning notifications
- Diagnostic error code center
- Low battery protection
- Electronic fuse
- Operating voltage 7.4v - 14.8v
- Includes USB Link for programming
- does not impact battery space
|
*Parts substitutions may be made based on availability. If a substitution is made, parts of equal or greater quality will be used in your build. All parts are generally held in stock.
View larger 
My first KWA AEG
Long story short:
I was griping about my old AEG, and what a piece of crap it is, and a friend introduced me to Dan (Tactical Parts). We all talked long and hard about AEGs in general, good point and bad points, and what separates KWA from the rest of the pack. For whatever reason, the Mod.1 just looked **right** to me, and I was interested in going the SMG route, but didn't want an MP5 or MP7 or Uzi or whatever everyone else is running. Honestly, the Mod.1 just looks so much better than any of the MPs. I pulled the trigger (literally) on the purchase, along with a couple boxes of mags. The AEG came stock, except for the bucking. Dan put a G&G Green in it.
And up until TODAY, I've run this thing stock, and it has been as competitive as others' upgraded replicas. I've had only ONE issue with this AEG, and it was my fault (bad solder job when I converted it to deans, and it blew the fuse) Today I put an ASG Infinity 30K motor in it (all my replicas have an ASG Infinity of some flavor). I have run the Mod.1 as my main nearly every week since June 1st, and it was my backup which got run for half a game when I ran into a tree with my M1A1 and broke the mag and sheared off the feedlips of the hop chamber. And I will be running it tomorrow for our Alamo game. I have 18 airsoft replicas. The Mod.1 is my main.
I like this AEG so much I bought a second one. No, really... Tactical Parts helped me source it, and I purchased it through them as a grand raffle prize for SAASMaine's "OP: Damage Control", an event to raise funds and awareness of the Maine Veteran's Project which assists Maine Veterans to combat the 22 veteran suicides per day. I could have purchased any AEG out there, but I opted for this one.
The Mod.1 is quite possibly the finest AEG available. Especially at this price point.